Enterview 5 Colour Door Entry Intercom Weatherproof Vandal Kit ESP

The EV5C from ESP presents crystal clear colour imagery from your front door to the 4 monitor inside your building, allowing you to see any visitors or potential threats from an out-of-sight location. Bright LEDs provide fantastic illumination, so you can always make out a face, even in darkness.

The stylish low profile monitor unit provides a facility to activate a lock release, transfer calls to other handsets and select the video feed from the camera call point on demand.

The system can be extended by adding up to 3 additional video handsets, 2 additional audio handsets, and one additional external call point camera.

Cabling of Enterview 5 systems is simple, the included power supply feeds suitable voltage to both the monitor and camera. An Additional power supply ( EVBPS ) is only required when introducing a lock release. There is no need for specialist video cable, Cat5 is recommended (4 Core installation). Simply bring cable from the camera/s to a central location and then take a separate cable to each monitor on the system. Power supplies for the monitors can be located close to each monitor or centrally but should be no more than 40m from the monitor position.

Main Features:
Clear high resolution colour picture on 4” monitor
Up to 3 additional monitors per system
Up to 2 additional audio handsets per system
Up to 2 camera call points per system
Door release button
Two camera input
Simple 4 core cable installation

Handset/Monitor Features:
Stylish low profile design
4 colour monitor
High-quality audio
Volume control
Inputs for two camera call points
Call transfer facility
A visitors call can be transferred to all other handsets on the system
Lock release activation
Lock release can be remotely activated from the handset
View on demand facility
User can select to view the video feed from camera /s
Brightness and contrast controls
Up to 70m cable from monitor to camera ( cat5)

Door Access/Camera Features:
vandal-resistant metal housing
Integral high white LEDs
Visitors are clearly illuminated even in low light conditions
Weatherproof IP65 rated
Small surface mount design
Can be fitted to door frame
3.6mm wide angle 70 degree lens
High-quality CCD image chip
Powered directly from monitor

Whats Included in the Kit?
1x Handset Monitor Station – LCD Mono Screen
1x Camera Door Station – Mono Camera with Electric Door Speaker
1x Power Supply

Technical Specification:

Monitor:
Power:  14.5VDC Direct from PSU
Installation:  Surface Mounted
Operating Temperature:  Minus 10 – Plus 55ºC
Consumption:  800mA / 14.5DC
Dimensions Surface:  205(W) x 220(H) x 55(D)mm
Net Weight:  875g

Camera:
Image sensor:  1/3 Colour CCD
Min Illumination:  1 LUX
Illumination White:  LED 4 pcs
Lens:  LG/3.6mm
IRIS system:  Electronic automatic
Viewing angle:  Horizontal 70° Vertical 50°
Voice transmission:  Full duplex speech
Power source:  DC 15V (+ 1V) from Monitor
Assurance Temperature:  -10°C~+50°C (14°F-122°F)
Cabinet:  vandal-resistant metal
Weight:  296g
Dimensions:  Surface 56(W) x 133(H) x 40(D)mm

Comes with a 3 year Manufacturer’s Warranty